10gb Sfp - 1.25G 20KM 1310nm Dual Fiber Single mode SFP module – HDV Detail:
Applications
Switch
Video monitor system Telecommunication system
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | |
| Storage Temperature | TS | -40 | +85 | ℃ | |
| Operating Temperature | TOP | Commercial level | -20 | +70 | ℃ |
| industrial level | -40 | 85 | |||
| Supply Voltage | VCC | -0.5 | +4.5 | V | |
| Voltage on Any Pin | VIN | 0 | VCC | V | |
| Soldering Temperature ,Time | - | 260℃, 10 S | ℃,S | ||
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typ | Max. | Unit | |
| Ambient Temperature | TAMB | Commercial level | 0 | - | 70 | ℃ |
| industrial level | -40 | 85 | ||||
| Power Supply Voltage | V CC-VEE | 3 | 3.3 | 3.6 | V | |
Operating Conditions
1 Transmitter（T=25℃, Vcc=3~3.6V (+3.3V)） 1.25G
| Parameter | Symbol | Min. | Typ | Max. | Unit | |||
| Center Wavelength | lc | FP OR DFB | 1520 | 1550 | 1580 | nm | ||
| 1280 | 1310 | 1340 | ||||||
| CWDM | l-6 | l(note1) | l+6 | |||||
| Spectral width | △l | FP@RMS | - | 1 | 2 | nm | ||
| DFB@-20dBFWHM | - | - | 1 | |||||
| Side Mode Suppression Ratio | SMSR (DFB only) | 30 | dB | |||||
| Output Power | 0~20km | 1310 FP | Po | -9 | - | -3 | dBm | |
| 20km | 1550 DFB | -9 | - | -0 | ||||
| CWDM |
-9 |
- |
-0 |
||||
| 40km | 1550 DFB |
-5 |
0 |
||||
| CWDM |
-5 |
0 |
|||||
| 80km | 1550 DFB |
-3 |
2 | ||||
| CWDM |
-3 |
2 | |||||
| Extinction Ratio | ER | 1.25G | 9 | - |
dB |
||
| Supply Current | ICCT | - |
150 |
mA |
|||
| Input Differential Impedance | Rin | 100 |
Ω |
||||
| Data Input Swing Differential | Vin |
300 |
1200 |
mV |
|||
| Optical Modulation Amplitude | OMA |
174 |
μW |
||||
| Transmit Disable Voltage | VD |
2.0 |
Vcc |
V |
|||
| Transmit Enable Voltage | VEN | 0 |
0.8 |
V |
|||
| Transmit Disable Assert Time |
10 |
us |
|||||
| Optical Rise/Fall Time | Tr/ Tf (20-80%) | 150 |
260 |
ps |
|||
| Deterministic Jitter Contribution | TX ΔDJ |
51.7 |
ps |
||||
| Total Jitter Contribution | TX ΔTJ |
90 |
ps |
||||
| Output Optical Eye | IUT-T G.957 Compliant | ||||||
Note1: l:1270,1290,1310,1330,1350,1370,1390,1410,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610.nm
2 Receiver （T=25℃, Vcc=3~3.6V (+3.3V) 1.25G
| Parameter | Symbol | Min. | Typ | Max. | Unit | |||
| Wavelength Range | lc | 1100 | 1610 | nm | ||||
| Sensitivity | 0~20km | 1.25G | Pin | PMIN | - | -24 | -23 | dBm |
| 40km | Pin | - | -25 | -24 | ||||
| 80km | Pin | - | -27 | -26 | ||||
| MAX. Input Power (Saturation) | PMAX | -3 | - | - | ||||
| Signal Detect Assert | PA | - | - | -24 | ||||
| Signal Detect De-assert | PD | -34 | - | - | ||||
| Signal Detect Hysteresis | PHYS | 1 | - | 4 | ||||
| Supply Current | ICCR | - | - | 150 | mA | |||
| Data Output Swing Differential | Vout | 400 | - | 1000 | mV | |||
| Signal Detect Voltage – High | VSDHC | 2.0 | - | VCC | V | |||
| Signal Detect Voltage – Low | VSDL | 0 | - | 0.8 | ||||
Notes:
switch from a high state to a low state.
1)Value of output power and sensitivity can be customized according to the demand
Ordering Information
Example
DSFP 49 24-C 1 2 LC - 80
| Sign | Mean | Description | |||||
| DSFP |
Module type |
DSFP= Dual fibers SFP | SFP=Single fiber SFP | ||||
| 49 |
Center wave |
30=1310tx/NO rx | 50=1550tx/NO RX | CWDM Like 49=1490 CWDM TX 1100~1610 RX | |||
| 24 | date Rate | 03=155M | 12=622M | 24=1.25G | 48=2.5G | 60=3.125G | |
| C | Laser type | F=FP | D=DFB | C=CWDM | V=VCSEL | ||
| 1 |
Operating T |
1=-20~+70℃ | 2=-40~+85℃ | ||||
| 1 | DDMI | 1=NO DDM | 2=DDMI | ||||
| LC | Connector | SC=SC | LC=LC | ||||
| 80 | Distance | 022=220M | 055=550M | 5=5KM | 10=10KM | ||
| 20=20KM | 40=40KM | 80=80KM | 100=100KM | ||||
Example
DSFP 3X 24-0 12 LC - 80
| Sign | Mean | Description | |||||
| DSFP |
Module type |
DSFP= Dual fibers SFP | SFP=Single fiber SFP | ||||
| 3X |
Center wave |
88=850NM T&R | 3x=1310 tx/1100~1610 RX | CWDM Like 49=1490 CWDM TX 1100~1610 RX | |||
| 24 | date Rate | 03=155M | 12=622M | 24=1.25G |
48=2.5G |
60=3.125G | |
| 0 | Laser type | 0=no LD | |||||
| 1 |
Operating T |
1=-20~+70℃ | 2=-40~+85℃ | ||||
| 2 | DDMI | 1=NO DDM | 2=DDMI | ||||
| LC | Connector | SC=SC | LC=LC | ||||
| 20 | Distance | 022=220M | 055=550M |
5=5KM |
10=10KM | ||
| 20=20KM | 40=40KM |
80=80KM |
100=100KM | ||||
Typical products
| Part No. | Wavelength | Con- nector | Temp. | TXPower (dBm) | RX Sens(Max.) (dBm) | DD MI | Distance |
| DSFP3X24-F11LC-20 | T 1310FP/rx 1100~1610 |
LC |
-20 to 70 | -9 to-0 | -23 | F | 20km |
| DSFP5X24-D12LC-40 | T 1550DFP /R 1100~1610 |
LC |
-20 to 70 | -5~0 | -24 | T | 40KM |
| DSFP6124-C12LC-80 | T 1610 CWDM/ R1100~1610 |
LC |
-20 to 70 | -3 to 2 | -26 | T | 80km |
Designing notice
DSFP Pin description
|
Pin |
Descriptions | Pin | Descriptions |
|
1 |
VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
|
2 |
TFAULT | Transmitter Fault. | 2 |
|
3 |
TDIS | Transmitter Disable. Laser output disabled on high or open. | 3 |
|
4 |
MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 4 |
|
5 |
MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 4 |
|
6 |
MOD_DEF(0) | Module Definition 0. Grounded within the module. | 4 |
|
7 |
Rate Select | No connection required | |
|
8 |
LOS | Loss of Signal indication. Logic 0 indicates normal operation. | 5 |
|
9 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
10 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
11 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
12 |
RD- | Receiver Inverted DATA out. AC Coupled | |
|
13 |
RD+ | Receiver Non-inverted DATA out. AC Coupled | |
|
14 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
15 |
VCCR | Receiver Power Supply | |
|
16 |
VCCT | Transmitter Power Supply | |
|
17 |
VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
|
18 |
TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
|
19 |
TD- | Transmitter Inverted DATA in. AC Coupled. | |
|
20 |
VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)
SFP Host Board Mechanical Layout
Product detail pictures:
Related Product Guide:
Telecom Infra Project offers Transponder Abstraction Interface to link optical modules with network operating systems | Sfp Gpon Onu
Microsemi PolarFire FPGA burst mode receiver enables transceiver-sized 10G PON OLT designs | Second Hand Onu
We've been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We are able to assure you product or service quality and aggressive cost for 10gb Sfp - 1.25G 20KM 1310nm Dual Fiber Single mode SFP module – HDV , The product will supply to all over the world, such as: Netherlands, Czech republic, Oman, Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
By Prudence from Istanbul - 2016.08.18 18:38
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Elsa from Thailand - 2015.02.12 14:52
Products categories
Write your message here and send it to us