● HUR4113XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access .
● HUR4113XR is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
● HUR4113XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Stan- dard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
● Support EPON/GPON mode and switch mode automatically
● Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
● Support IPv4 and IPv6 Dual mode
● Support 2.4G&5.8G WIFI and Multiple SSID
● Support LAN IP and DHCP Server configura-tion
● Support Port Mapping and Loop-Detect
● Support Firewall function and ACL function
● Support IGMP Snooping/Proxy multicast feature
● Support TR069 remote configuration and maintenance
● Specialized design for system breakdown prevention to maintain stable system
|
Item |
Parameter |
|
PON Interface |
1 GPON BoB（ Bosa on Board） Receiving sensitivity: ≤-27dBm Transmitting optical power: 0.5~+5dBm Transmission distance: 20KM |
|
Wavelength |
TX: 1310nm, RX: 1490nm |
|
Optical Interface |
SC/APC Connector |
|
Chip Spec |
RTL9607C DDR3 256MB |
|
Flash |
1Gbit SPI NAND Flash |
|
LAN Interface |
2 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Compliant with IEEE802.11b/g/n, ac 2.4G Operating frequency:2.400-2.4835GHz 5.8G Operating frequency:5.150-5.825GHz |
|
Wireless |
2.4G 2*2 MIMO, rate up to 300Mbps 5.8G 2*2 MIMO, rate up to 867Mbps 2 external antennas 5dBi Support Multiple SSID |
|
LED |
7 LED, For Status of PWR、 LOS、 PON、 LAN1、 LAN2、2.4G、5.8G |
|
Push-Button |
2 For Function of Factory Reset and WPS |
|
Operating Condition |
Temperature: 0 ℃~+50 ℃ Humidity: 10% ～90%（ non-condensing） |
|
Storing Condition |
Temperature: -30℃~+60 ℃ Humidity: 10%~90%（ non-condensing） |
|
Power Supply |
DC 12V/1A |
|
Power Consumption |
≤6W |
|
Dimension |
285mm×131mm×45mm（ L×W×H） |
|
Net Weight |
0.35Kg |
|
Pilot Lamp |
Status |
Description |
|
PWR |
on |
The device is powered up. |
|
of |
The device is powered down. |
|
Pilot Lamp |
Status |
Description |
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Of |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN2 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
|
|
2.4G |
On |
2.4G WIFI interface up |
|
Blink |
2.4G WIFI is sending or/and receiving data (ACT). |
|
|
Off |
2.4G WIFI interface down |
|
|
5.8G |
On |
5G WIFI interface up |
|
Blink |
5G WIFI is sending or/and receiving data (ACT). |
|
|
Off |
5G WIFI interface down |
● Typical Solution： FTTH(Fiber To The Home)
● Typical Business： INTERNET、 IPTV、WIFI
Products categories
Write your message here and send it to us