China Factory for Bidi Sfp - 1.25G 1310nm 20KM Single mode dual fiber LC Sfp Module – HDV

Short Description:

Send email to us DOWNLOAD SPEC

Product Detail

Product Tags

Feedback (2)

No matter new customer or previous client, We believe in prolonged time period and trustworthy relationship for Sfp Onu Gepon, 1ge Wifi Onu, Sfp 10g Wdm, "Making the Products of Large Quality" is definitely the everlasting purpose of our enterprise. We make unremitting endeavours to know the target of "We Will Always Hold in Pace along with the Time".

China Factory for Bidi Sfp - 1.25G 1310nm 20KM Single mode dual fiber LC Sfp Module – HDV Detail:

Applications：

Switch
Video monitor system
Telecommunication system

Product parameters：

Part No.	Wavelength	Connector	Temp.	TX Power (dBm)	RX Sens (Max.) (dBm)	DDMI	Distance
DSFP3X24-F11LC-20	T 1310FP/rx 1100~1610	LC	-20 to 70	-9 to-0	-23	F	20km
DSFP5X24-D12LC-40	T 1550DFP /R 1100~1610	LC	-20 to 70	-5~0	-24	T	40KM
DSFP6124-C12LC-80	T 1610 CWDM/ R 1100~1610	LC	-20 to 70	-3 to 2	-26	T	80km

Ordering Information：

Example
DSFP 3X 24-0 12 LC – 20

Sign	Mean	Description
DSFP	Module type	DSFP= Dual fibers SFP			SFP=Single fiber SFP
3X	Center wave	88=850NM T&R		3x=1310 tx/1100~1610 RX		CWDM Like 49=1490 CWDM TX 1100~1610 RX
24	date Rate	03=155M	12=622M	24=1.25G		48=2.5G	60=3.125G
0	Laser type	0=no LD
1	Operating T	1=-20~+70℃		2=-40~+85℃
2	DDMI	1=NO DDM		2=DDMI
LC	Connector	SC=SC		LC=LC
20	Distance	022=220M		055=550M		5=5KM		10=10KM
		20=20KM		40=40KM		80=80KM		100=100KM

Absolute Maximum Ratings：

Parameter	Symbol		Min	Max	Unit
Storage Temperature	TS		-40	+85	℃
Operating Temperature	TOP	Commercial level	-20	+70	℃
Operating Temperature	TOP	industrial level	-40	85	℃
Supply Voltage	VCC		-0.5	+4.5	V
Voltage on Any Pin	VIN		0	VCC	V
Soldering Temperature ,Time	-			260℃, 10 S	℃,S

Recommended Operating Conditions：

Parameter	Symbol		Min.	Typ	Max.	Unit
Ambient Temperature	TAMB	Commercial level	0	-	70	℃
Ambient Temperature	TAMB	industrial level	-40		85	℃
Power Supply Voltage	V CC-VEE		3	3.3	3.6	V

Operating Conditions：

1. Transmitter（T=25℃, Vcc=3~3.6V (+3.3V)） 1.25G

Parameter		Symbol			Min.	Typ	Max.	Unit
Center Wavelength		lc	FP OR DFB		1520	1550	1580	nm
					1280	1310	1340
			CWDM		l-6	l(note1)	l₊₆
Spectral width		△l	FP@RMS		-	1	2	nm
			DFB@-20dB FWHM		-	-	1
Side Mode Suppression Ratio		SMSR (DFB only)			30			dB
Output Power	0~20km	1310 FP		Po	-9	-	-3	dBm
	20km	1550 DFB			-9	-	-0
		CWDM			-9	-	-0
	40km	1550 DFB			-5		0
		CWDM			-5		0
	80km	1550 DFB			-3		2
		CWDM			-3		2
Extinction Ratio		ER		1.25G	9		-	dB
Supply Current		ICCT			-		150	mA
Input Differential Impedance		Rin				100		Ω
Data Input Swing Differential		Vin			300		1200	mV
Optical Modulation Amplitude		OMA			174			μW
Transmit Disable Voltage		VD			2.0		Vcc	V
Transmit Enable Voltage		VEN			0		0.8	V
Transmit Disable Assert Time							10	us
Optical Rise/Fall Time		Tr/ Tf (20-80%)				150	260	ps
Deterministic Jitter Contribution		TX ΔDJ					51.7	ps
Total Jitter Contribution		TX ΔTJ					90	ps
Output Optical Eye		IUT-T G.957 Compliant

2.Receiver （T=25℃, Vcc=3~3.6V (+3.3V) 1.25G

Parameter			Symbol		Min.	Typ	Max.	Unit
Wavelength Range			lc		1100		1610	nm
Sensitivity	0~20km	1.25G	Pin	PMIN	-	-24	-23	dBm
	40km		Pin		-	-25	-24
	80km		Pin		-	-27	-26
MAX. Input Power (Saturation)			PMAX		-3	-	-
Signal Detect Assert			PA		-	-	-24
Signal Detect De-assert			PD		-34	-	-
Signal Detect Hysteresis			PHYS		1	-	4
Supply Current			ICCR		-	-	150	mA
Data Output Swing Differential			Vout		400	-	1000	mV
Signal Detect Voltage – High			VSDHC		2.0	-	VCC	V
Signal Detect Voltage – Low			VSDL		0	-	0.8	V

Notes:

switch from a high state to a low state.
1)Value of output power and sensitivity can be customized according to the demand

Designing notice：

DSFP Pin description

Pin	Descriptions	Pin	Descriptions
1	VEET	Transmitter Ground (Common with Receiver Ground)	1
2	TFAULT	Transmitter Fault.	2
3	TDIS	Transmitter Disable. Laser output disabled on high or open.	3
4	MOD_DEF(2)	Module Definition 2. Data line for Serial ID.	4
5	MOD_DEF(1)	Module Definition 1. Clock line for Serial ID.	4
6	MOD_DEF(0)	Module Definition 0. Grounded within the module.	4
7	Rate Select	No connection required
8	LOS	Loss of Signal indication. Logic 0 indicates normal operation.	5
9	VEER	Receiver Ground (Common with Transmitter Ground)	1
10	VEER	Receiver Ground (Common with Transmitter Ground)	1
11	VEER	Receiver Ground (Common with Transmitter Ground)	1
12	RD-	Receiver Inverted DATA out. AC Coupled
13	RD+	Receiver Non-inverted DATA out. AC Coupled
14	VEER	Receiver Ground (Common with Transmitter Ground)	1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground (Common with Receiver Ground)	1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in. AC Coupled.
20	VEET	Transmitter Ground (Common with Receiver Ground)	1

Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)

SFP Host Board Mechanical Layout (Cont.)

Recommended Bezel Design

Product detail pictures:

Related Product Guide:
Jabil AOC Technologies jumps into coherent 100G/200G CFP2-DCO optical transceivers | Single Fiber Sfp Module
Effdon 100-Gbps CFP module supports 80 km | Sfp Gpon Onu

We provide fantastic energy in top quality and advancement,merchandising,gross sales and marketing and operation for China Factory for Bidi Sfp - 1.25G 1310nm 20KM Single mode dual fiber LC Sfp Module – HDV , The product will supply to all over the world, such as: Angola, Bangladesh, Toronto, We follow up the career and aspiration of our elder generation, and we're eager to open up a new prospect in this field, We insist on "Integrity, Profession, Win-win Cooperation", because we have now a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.

1.25g 10km Sfp