Chinese Professional Human Body Temperature Measurement Thermal Camera - Mobile Installation 1080P Screen Resolution Measurement Detector Camera Masked Face Recognition Body Temperature Instrument – HDV

Short Description:

Send email to us DOWNLOAD SPEC

Product Detail

Product Tags

Feedback (2)

Our improvement depends on the superior equipment, excellent talents and continuously strengthened technology forces for Onu Wifi Modem, Sfp Transceiver Module Sfp, Oem Cisco Sfp, Welcomes all abroad close friends and retailers to ascertain collaboration with us. We are going to give you with genuine, high-quality and successful company to satisfy your requirements.

Chinese Professional Human Body Temperature Measurement Thermal Camera - Mobile Installation 1080P Screen Resolution Measurement Detector Camera Masked Face Recognition Body Temperature Instrument – HDV Detail:

Mobile Installation 1080P Screen Resolution Measurement Detector Camera Masked Face Recognition Body Temperature Instrument

1.Introduction:
The FaceTick Pro facial recognition and body temperature abnormity detection device is capable of detecting temperature abnormity without actual physical contact at different applicable scenes, alerting people with abnormal body temperature , recognize facial identity while wearing the mask, or without mask.
In the meantime, it obtains and analyzes relevant data from open source and able to trace it back to its original, and well facilitates the management in making better decision based on scientific evidence, ensure safety and significantly improve operational efficiency.2.Specification:
lEnables live body recognition
lEnables track of the movement of a human face in backlit environment
lPatent owned facial recognition algorithm, able to recognize faces with high accuracy, response time<0.5s
lEnables body temperature detection, range is between 30℃~45℃, with discrepancy ±0.5℃
lEnables recognition of facial identity wearing the mask[1]
lEnables mask detection, alert people who is not wearing a mask
lBuilt-in high-performance NPU
lLinux operating system, high reliability
lMTBF>50,000h
lCapable of storing 24,000+ facial image and up to 50,000 capture record
lOperating temperature: 15℃~35℃
lSupports multiple interfaces(I/O WG26WG34RJ45)
l8 inches HD display, image display without delay
lAutomatic gain and auto white balance, able to exhibit the true color of the image
lBuilt-in black light level sensor, low-light recognition is in high accuracy
l2D/3D noise reduction anti-fog technology, low-light recognition smoothening capability
lSupports intelligent light filled setting

3.Thechnical Specifications:
Detection Parameters
Facial Recognition Parameters

Item	Specification
Detecting Range (Vertical)	0.8~2.2m,adjustable angle
Face angle	Horizontally 30° Vertically 30°
Response time	<0.5 seconds
Storage Capacity	50,000 capture record
Facial image record capacity	24,000 pieces
Face recognition accuracy	>99.25%

Camera Parameters

Item	Specification
Camera	Binocular camera,Visible and near infrared,Supports live body detection
Effective MegaPixels	210, (1920*1080)
Minimum illumination	multicolor 0.01Lux @F1.2(ICR); Black and white 0.001Lux @F1.2 (ICR)
Signal to noise ratio	≥50db(AGC OFF)
Wide dynamic	120db, ISP algorithm face partial exposure
Remote device upgrade	Support

Interface

Item	Specification
Digital output	1 digital output
Network interface	1 RJ45 10M / 100M adaptive Ethernet port
USB interface	1 USB
WG	1 WG in,1 WG out
Interface	RS485 port x 1

General Parameters

Item	Specification
Processor	Dual-core processor+1G memory +16G Flash
OS	Linux
Image Sensor	1/2.8″ Progressive Scan CMOS
Speaker	Standard and able to pre-record content
Operating Temperate	Indoor recommended 0~90% RH
Antistatic	Contact ±6KV,Air ±8KV
Power requirement	DC12V/2A
Power consumption	20W(MAX)
Dimension	252(L)136(W)26(H)mm
Screen size	8 inches
Column Aperture	36mm
Weight	1.7KG

Model Type:

Product name	Model	Description
FaceTick PRO	RNR-FT-P158	Device
Wall mount	910C-0X0000-030	Fitting
Pole stand	910C-0X0000-029	Fitting
RecoFace V1.0	RN-GF-E15-01A	Platform software

4.Important Ssfety Information
This section presents important information intended to ensure safe and effective use of this product.
Read this section carefully and store it in an accessible location.5.Safety Precautions
lWhen the device cannot be exited or terminated, you can reset and restart it by powering off and on again.
lWhen using the device, try to avoid hard objects from impact and knock, and do not scratch with sharp objects to prevent damage to the device casing.
lWipe the display and panel lightly with a soft cloth and other materials. Avoid using water and detergent.
lIn the installation and use of this product, all national and regional electrical regulations must be strictly observed.
lIf the equipment does not work properly, please do not disassemble it for repair, otherwise it will affect the equipment warranty.
lAvoid extreme high temperature (or low temperature), high humidity, vibration, radiation, chemical corrosion and other harsh or extreme environments during installation and use.

Product detail pictures:

Related Product Guide:
Menara Networks announces availability of new OTN tunable SFP+ for commercial and industrial temperature applications | Single Fiber Sfp Module
This Apparel Brand Is Spending $1 Million To Take Athleisure To Another Level | Sfp Gpon Onu

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Chinese Professional Human Body Temperature Measurement Thermal Camera - Mobile Installation 1080P Screen Resolution Measurement Detector Camera Masked Face Recognition Body Temperature Instrument – HDV , The product will supply to all over the world, such as: Namibia, Argentina, Cyprus, With the spirit of "credit first, development through innovation, sincere cooperation and joint growth", our company is striving to create a brilliant future with you, so as to become a most valuable platform for exporting our goods in China!

Body Temperature Detector Camera