Technical specification |
|||
Item |
ET04P4COMBO |
||
Chassis |
Rack |
1U 19 inch standard box |
|
1000M |
QTY |
8 |
|
Copper |
4*10/100/1000M auto-negotiation |
||
SFP(independent) |
4*SFP slot (Combo) |
||
EPON Port |
QTY |
4 |
|
Physical Interface |
SFP Slots |
||
Connector Type |
1000BASE-PX20+ |
||
Max splitting ratio |
1:64 |
||
Management Ports |
1*100BASE-TX outband port 1CONSOLE port | ||
PON Port Specification |
Transmission Distance |
20KM |
|
EPON port speed |
Symmetrical 1.25Gbps |
||
Wavelength |
TX 1490nm, RX 1310nm |
||
Connector |
SC/PC |
||
Fiber Type |
9/125μm SMF |
||
TX Power |
+2~+7dBm |
||
Rx Sensitivity |
-27dBm |
||
Saturation Optical Power |
-6dBm |
||
Function |
|||
Management Mode |
WEB, Management mode, SNMP, Telnet and CLI |
||
Management Function |
Fan Group Detecting; |
||
Port Status monitoring and configuration management; |
|||
Layer2 switch configuration such as VLAN, Trunk, RSTP, IGMP, QOS, etc; |
|||
EPON management function: DBA,ONU authorization, ACL, QOS, etc; |
|||
Online ONU configuration and management; |
|||
User management; |
|||
Alarm management. |
|||
Layer2 Switch |
Support port VLAN and protocol VLAN; |
||
Support 4096 VLANs; |
|||
Support VLAN tag/Un-tag ,VLAN transparent transmission, QinQ; |
|||
Support IEEE802.3d trunk; |
|||
Support RSTP; |
|||
QOS based on port, VID, TOS and MAC address; |
|||
IGMP Snooping; |
|||
IEEE802.x flow control; |
|||
Port stability statistic and monitoring. |
|||
EPON Function |
Support port-based rate limitation and bandwidth control; |
||
In compliant with IEEE802.3ah standard; |
|||
Up to 20KM transmission Distance; |
|||
Support data encryption, multi-cast, port VLAN, separation, RSTP, etc; |
|||
Support Dynamic Bandwidth Allocation (DBA); |
|||
Support ONU auto-discovery/link detection/remote upgrade of software; |
|||
Support VLAN division and user separation to avoid broadcast storm; |
|||
Support various LLID configuration and single LLID configuration; |
|||
Different user and different service could provide different QoS by means of |
|||
different LLID channels; |
|||
Support power-off alarm function, easy for link problem detection; |
|||
Support broadcasting storm resistance function; |
|||
Support port isolation between different ports; |
|||
Support ACL and SNMP to configure data packet filter flexibly; |
|||
Specialized design for system breakdown prevention to maintain stable system; |
|||
Support dynamic distance calculation on EMS online; |
|||
Support RSTP, IGMP Proxy. |
|||
Physical description |
|||
Dimension(L*W*H) |
440mm*280mm*44mm |
||
Weight |
4.2kg |
||
Power Supply |
220VAC |
AC:90~240V, 47/63Hz |
|
-48DC |
DC: -36V~72V |
||
Power Consumption |
30W |
||
Operating Environment |
Working Temperature |
0~50℃ |
|
Storage Temperature |
-40~+85℃ |
||
Relative Humidity |
5~90%(non-conditioning) |