Factory wholesale Cisco Transceiver - SFP+ 10GBASE-T Transceiver RJ45 Module 10g copper sfp – HDV

Short Description:

Send email to us DOWNLOAD SPEC

Product Detail

Product Tags

Feedback (2)

With this motto in mind, we've come to be one of quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for Gpon Onu Cisco, Onu Epon Ftth, Gepon 1ge Onu, We warmly welcome clients from all around the world for almost any sort of cooperation with us to build a mutual advantage potential. We've been devoting ourselves wholeheartedly to supply consumers the very best company.

Factory wholesale Cisco Transceiver - SFP+ 10GBASE-T Transceiver RJ45 Module 10g copper sfp – HDV Detail:

SFP+ 10GBASE-T Transceiver RJ45 Module 10g copper sfp

1、PRODUCT FEATURES

Support	10Gbase-T / 5Gbase-T / 2.5Gbase-T
Compact	Compactnnector assembly
RoHS	compliant and lead-free
Supply	3.3V
Ambient Operating temperature	0°C to +60°C

2、PRODUCT DESCRIPTION

SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset.

3.、Cable Length

Standard	Cable	Reach	Host Port
10gbase-T	CAT6A	30m	xfi
5Gbase-T/2.5Gbase -t	CAT5E	50m	5Gbase – R/2.5GBase-X
1000base-T	CAT5E	100m	1000base-FX

4、SFP to Host Connector Pin Out

Pin	Symbol	Name/Description	Ref
1	VEET	Transmitter Ground (Common with Receiver Ground)	1
2	TFAULT	Transmitter Fault. Not supported
3	TDIS	Transmitter Disable. Laser output disabled on high or open	2
4	MOD_DEF(2)	Module Definition 2. Data line for Serial ID	3
5	MOD_DEF(1)	Module Definition 1. Clock line for Serial ID	3
6	MOD_DEF(0)	Module Definition 0. Grounded within the module	3
7	Rate Select	No connection required
8	LOS	High indicates no linked. low indicates linked.	4
9	VEER	Receiver Ground (Common with Transmitter Ground)	1
10	VEER	Receiver Ground (Common with Transmitter Ground)	1
11	VEER	Receiver Ground (Common with Transmitter Ground)	1
12	RD-	Receiver Inverted DATA out. AC Coupled
13	RD+	Receiver Non-inverted DATA out. AC Coupled
14	VEER	Receiver Ground (Common with Transmitter Ground)	1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground (Common with Receiver Ground)	1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in. AC Coupled.
20	VEET	Transmitter Ground (Common with Receiver Ground)	1

5、+3.3V Volt Electrical Power Interface

Parameter	Symbol	Min	Typ	Max	unit	Notes/Conditions
Supply Current	Is		700	900	mA	3.0W max power over full range of voltage and temperature.
InputVoltage	Vcc	3.13	3.3	3.47	V	Referenced to GND
Maximum Voltage	Vmax			3	V
Surge Current	Isurge		TBD		mA	Hot plug above steady state current. See caution note below

SFP+ 10GBASE-T Transceiver Copper RJ45 Module 10g copper sfp
copper sfp module 1000base-t sfp rj45 100m optical transceiver compatible with cisco

Product detail pictures:

Using a complete scientific high quality management program, superior high quality and superior faith, we acquire great reputation and occupied this industry for Factory wholesale Cisco Transceiver - SFP+ 10GBASE-T Transceiver RJ45 Module 10g copper sfp – HDV , The product will supply to all over the world, such as: Accra, Roman, United Arab Emirates, So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly solutions, reuse on the solution. We've Updated our catalog, which introduces our organization. n detail and covers the primary products we provide at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.

Dual Fiber Sfp