Free sample for 125g Sfp Bidi - 155m Lc 1310nm Dual Fiber 20km Fiber Optic Transceiver Sfp Module – HDV Detail:
Applications
Switch
Video monitor system Telecommunication system
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | |
| Storage Temperature | TS | -40 | +85 | ℃ | |
| Operating Temperature | TOP | Commercial level | -20 | +70 | ℃ |
| industrial level | -40 | 85 | |||
| Supply Voltage | VCC | -0.5 | +4.5 | V | |
| Voltage on Any Pin | VIN | 0 | VCC | V | |
| Soldering Temperature ,Time | - | 260℃, 10 S | ℃,S | ||
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typ | Max. | Unit | |
| Ambient Temperature | TAMB | Commercial level | 0 | - | 70 | ℃ |
| industrial level | -40 | 85 | ||||
| Power Supply Voltage | V CC-VEE | 3 | 3.3 | 3.6 | V | |
Operating Conditions
1 Transmitter（T=25℃, Vcc=3~3.6V (+3.3V)） 155M
| Parameter | Symbol | Min. | Typ | Max. | Unit | |||
| Center Wavelength | FP | 1280 | 1310 | 1340 | ||||
| Spectral width | △l | FP@RMS | - | 4 | 6 | nm | ||
| Side Mode Suppression Ratio | SMSR (DFB only) | 30 | dB | |||||
| Output Power | 0~30km | 1310 FP | Po | -12 | - | -0 | dBm | |
| Extinction Ratio | ER | 155M | 10 | - | dB | |||
| Supply Current | ICCT | - | 150 | mA | ||||
| Input Differential Impedance | Rin | 100 | Ω | |||||
| Data Input Swing Differential | Vin | 300 | 1200 | mV | ||||
| Optical Modulation Amplitude | OMA | 174 | μW | |||||
| Transmit Disable Voltage | VD | 2.0 |
Vcc |
V | |
| Transmit Enable Voltage | VEN | 0 |
0.8 |
V | |
| Transmit Disable Assert Time |
10 |
us | |||
| Optical Rise/Fall Time | Tr/ Tf (20-80%) | 400 |
8000 |
ps | |
| Output Optical Eye | IUT-T G.957 Compliant | ||||
2 Receiver （T=25℃, Vcc=3~3.6V (+3.3V) 155M
| Parameter | Symbol | Min. | Typ | Max. | Unit | |||
| Wavelength Range | lc | 1100 | 1610 | nm | ||||
| Sensitivity | 0~30km | 155M | Pin | PMIN | - | -35 | -34 | dBm |
| MAX. Input Power (Saturation) | PMAX | -0 | - | - | ||||
| Signal Detect Assert | PA | - | - | -34 | ||||
| Signal Detect De-assert | PD | -44 | - | - | ||||
| Signal Detect Hysteresis | PHYS | 1 | - | 4 | ||||
| Supply Current | ICCR | - | - | 150 | mA | |||
| Data Output Swing Differential | Vout | 400 | - | 1000 | mV | |||
| Signal Detect Voltage – High | VSDHC | 2.0 | - | VCC | V | |||
| Signal Detect Voltage – Low | VSDL | 0 | - | 0.8 | ||||
Notes:
switch from a high state to a low state.
1)Value of output power and sensitivity can be customized according to the demand
Ordering Information
Example
DSFP 3X 03-F 1 1 LC - 20
| Sign | Mean | Description | |||||
| DSFP | Module type | DSFP= Dual fibers SFP | SFP=Single fiber SFP | ||||
| 3X | Center wave | 3X=1310tx/1100~1610 rx | 5X=1550tx/1100~1610 rx | CWDM Like 49=1490 CWDM TX 1100~1610 RX | |||
| 03 | date Rate | 03=155M | 12=622M | 24=1.25G |
48=2.5G |
60=3.125G | |
| F | Laser type | F=FP | D=DFB |
C=CWDM |
V=VCSEL | ||
| 1 | Operating T | 1=-20~+70℃ | 2=-40~+85℃ | ||||
| 1 | DDMI | 1=NO DDM | 2=DDMI | ||||
| LC | Connector | SC=SC | LC=LC | ||||
| 20 | Distance | 022=220M | 055=550M |
5=5KM |
10=10KM | ||
| 20=20KM | 40=40KM |
80=80KM |
100=100KM | ||||
Typical products
| Part No. | Wavelength | Con- nector | Temp. | TXPower (dBm) | RX Sens(Max.) (dBm) | DD MI | Distance |
| DSFP3X03-F11LC-20 | T 1310FP/rx 1100~1610 | LC | -20 to 70 | -12 to-0 | -34 | F | 20km |
Designing notice
DSFP Pin description
|
Pin |
Descriptions |
Pin |
Descriptions |
|
1 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault. |
2 |
|
3 |
TDIS |
Transmitter Disable. Laser output disabled on high or open. |
3 |
|
4 |
MOD_DEF(2) |
Module Definition 2. Data line for Serial ID. |
4 |
|
5 |
MOD_DEF(1) |
Module Definition 1. Clock line for Serial ID. |
4 |
|
6 |
MOD_DEF(0) |
Module Definition 0. Grounded within the module. |
4 |
|
7 |
Rate Select |
No connection required |
|
|
8 |
LOS |
Loss of Signal indication. Logic 0 indicates normal operation. |
5 |
|
9 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
10 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
|
|
13 |
RD+ |
Receiver Non-inverted DATA out. AC Coupled |
|
|
14 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply |
|
|
16 |
VCCT |
Transmitter Power Supply |
|
|
17 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-Inverted DATA in. AC Coupled. |
|
|
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled. |
|
|
20 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)
SFP Host Board Mechanical Layout
Figure 6 SFP Host Board Mechanical Layout (Cont.)
Recommended Bezel Design
Product detail pictures:
Related Product Guide:
AT&T Wants OCP to Consider uCPE Spec | Single Fiber Sfp Module
100G Lambda MSA updates specifications | Second Hand Onu
Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for Free sample for 125g Sfp Bidi - 155m Lc 1310nm Dual Fiber 20km Fiber Optic Transceiver Sfp Module – HDV , The product will supply to all over the world, such as: Cambodia, Ecuador, Morocco, Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Joyce from Belgium - 2016.06.19 13:51
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Sandra from French - 2016.08.18 11:04
Products categories
Write your message here and send it to us