Technical item | Details |
PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
Receiving sensitivity: ≤-27dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/APC Connector |
POTS interface | 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
LAN Interface | 1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
CATV interface | RF, optical power : +2~-18dBm |
Optical reflection loss: ≥45dB | |
Optical receiving wavelength: 1550±10nm | |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
RF output level: 78dBuV | |
AGC range: 0~-15dBm | |
MER: ≥32dB@-15dBm | |
Wireless | Compliant with IEEE802.11b/g/n, |
Operating frequency: 2.400-2.4835GHz | |
support MIMO, rate up to 300Mbps, | |
2T2R,2 external antenna 5dBi, | |
Support: multiple SSID | |
Channel: Auto | |
Modulation type: DSSS, CCK and OFDM | |
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM | |
LED | 14, For Status of POWER,LOS,PON,SYS,LAN1~LAN4,WIFI,WPS,Internet,FXS,Worn,Normal(CATV) |
Push-Button | 3,For Function of Reset,WLAN,WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Net Weight | 0.24Kg |
Pilot Lamp |
Status |
Description |
PWR |
On |
The device is powered up. |
Off |
The device is powered down. | |
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. | |
Off |
The device registration is incorrect. | |
LOS |
Blink |
The device doses not receive optical signals. |
Off |
The device has received optical signal. | |
SYS |
On |
The device system runs normally. |
Off |
The device system runs abnormally. | |
INTERNET |
Blink |
The device network connection is normal. |
Off |
The device network connection is abnormal. | |
WIFI |
On |
The WIFI interface is up. |
Blink |
The WIFI interface is sending or/and receiving data (ACT). | |
Off |
The WIFI interface is down. | |
FXS |
On |
Phone has registered to the SIP Server. |
Blink |
Phone has registered and data transmission (ACT). | |
Off |
Phone registration is incorrect. | |
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
Off |
The WIFI interface does not establish a secure connection. | |
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
Blink |
Port (LANx) is sending or/and receiving data (ACT). | |
Off |
Port (LANx) connection exception or not connected. | |
Worn (CATV) |
On |
Input optical power is higher than 3dbm or lower than -13dbm |
Off |
Input optical power is between -13dbm and 3dbm | |
Normal (CATV) |
On |
Input optical power is between -13dbm and 3dbm |
Off |
Input optical power is higher than 3dbm or lower than -13dbm |
Product Name |
Product Model |
Descriptions |
SFF Type XPON ONU |
1G3F+WIFI+CATV+POTS |
1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet , 1 SC/APC Connector, 1 FXS Connector, 2.4GHz WIFI, Plastic Casing, External power supply adapter |
Figure: 1G3F+WIFI+CATV+POTS Application Diagram