Product Description
1. Overview
Technical item
|
Details
|
PON Interface
|
1 GPON BoB(Class B+/Class C+)
|
Receiving sensitivity: ≤-27dBm/≤-29dBm
|
|
Transmitting optical power: +0.5~+5dBm/+2~+7dBm
|
|
Transmission distance: 20KM
|
|
Wavelength
|
TX: 1310nm, RX: 1490nm
|
Optical Interface
|
SC/UPC Connector
|
Design Scheme
|
RTL9607C+RTL8192FR(2.4G)+RTL8812ER(5G)+Si32192 BOB(RTL8290B)
|
Chip Spec
|
CPU 950MHz,DDR2 128MB
|
Flash
|
SPI NAND Flash 128MB
|
LAN Interface
|
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
|
Wireless
|
Compliant with IEEE802.11b/g/n,ac
|
2.4G Operating frequency:2.400-2.4835GHz
|
|
5.8G Operating frequency:5.150-5.825GHz
|
|
2.4G 2*2 MIMO, rate up to 300Mbps
|
|
5.8G 2*2 MIMO ,rate up to 867Mbps
|
|
4 external antennas 5dBi
|
|
Support Multiple SSID
|
|
POTS interface
|
FXS, RJ11 connector
|
Support: G.711/G.723/G.726/G.729 codec
|
|
Support: T.30/T.38/G.711 Fax mode, DTMF Relay
|
|
Line testing according to GR-909
|
|
USB
|
Standard USB2.0
|
LED
|
9 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G
|
Push-Button
|
2 ,For Function of Reset and WPS
|
Operating Condition
|
Temperature: 0℃~+50℃
|
Humidity: 10%~90%(non-condensing)
|
|
Storing Condition
|
Temperature: -30℃~+60℃
|
Humidity: 10%~90%(non-condensing)
|
|
Power Supply
|
DC 12V/1A
|
Power Consumption
|
≤6W
|
Dimension
|
248mm×158mm×192mm(L×W×H)
|
Net Weight
|
0.3Kg
|
Storing Condition
|
Temperature: -30℃~+60℃
|
4. Panel lights Introduction
Pilot Lamp
|
Status
|
Description
|
PWR
|
On
|
The device is powered up.
|
Off
|
The device is powered down.
|
|
LOS
|
Blink
|
The device doses not receive optical signals or with low signals.
|
Off
|
The device has received optical signal.
|
|
PON
|
On
|
The device has registered to the PON system.
|
Blink
|
The device is registering the PON system.
|
|
Off
|
The device registration is incorrect.
|
|
LAN1~LAN4
|
On
|
Port (LANx) is connected properly (LINK).
|
Blink
|
Port (LANx) is sending or/and receiving data (ACT).
|
|
Off
|
Port (LANx) connection exception or not connected.
|
|
2.4G
|
On
|
2.4G WIFI interface up
|
Blink
|
2.4G WIFI is sending or/and receiving data (ACT).
|
|
Off
|
2.4G WIFI interface down
|
|
5.8G
|
On
|
5G WIFI interface up
|
Blink
|
5G WIFI is sending or/and receiving data (ACT).
|
|
Off
|
5G WIFI interface down
|
5.Application
* Typical Solution:FTTH(Fiber To The Home)
* Typical Business:INTERNET、IPTV、WIFI 、VOIP etc