Ordinary Discount Gepon Olt Sfp - 155m Lc 1310nm Dual Fiber 20km Fiber Optic Transceiver Sfp Module – HDV

Short Description:

Send email to us DOWNLOAD SPEC

Product Detail

Product Tags

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for 850nm Sfp, Ftth Equipment, Sfp Module 850nm, We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.

Ordinary Discount Gepon Olt Sfp - 155m Lc 1310nm Dual Fiber 20km Fiber Optic Transceiver Sfp Module – HDV Detail:

Applications

Switch

Video monitor system Telecommunication system

Absolute Maximum Ratings

Parameter	Symbol		Min	Max	Unit
Storage Temperature	TS		-40	+85	℃
Operating Temperature	TOP	Commercial level	-20	+70	℃
Operating Temperature	TOP	industrial level	-40	85	℃
Supply Voltage	VCC		-0.5	+4.5	V
Voltage on Any Pin	VIN		0	VCC	V
Soldering Temperature ,Time	-			260℃, 10 S	℃,S

Recommended Operating Conditions

Parameter	Symbol		Min.	Typ	Max.	Unit
Ambient Temperature	TAMB	Commercial level	0	-	70	℃
Ambient Temperature	TAMB	industrial level	-40		85	℃
Power Supply Voltage	V CC-VEE		3	3.3	3.6	V

Operating Conditions

1 Transmitter（T=25℃, Vcc=3~3.6V (+3.3V)） 155M

Parameter		Symbol			Min.	Typ	Max.	Unit
Center Wavelength			FP		1280	1310	1340
Spectral width		△l	FP@RMS		-	4	6	nm
Side Mode Suppression Ratio		SMSR (DFB only)			30			dB
Output Power	0~30km	1310 FP		Po	-12	-	-0	dBm
Extinction Ratio		ER		155M	10		-	dB
Supply Current		ICCT			-		150	mA
Input Differential Impedance		Rin				100		Ω
Data Input Swing Differential		Vin			300		1200	mV
Optical Modulation Amplitude		OMA			174			μW

Transmit Disable Voltage	VD	2.0		Vcc	V
Transmit Enable Voltage	VEN	0		0.8	V
Transmit Disable Assert Time				10	us
Optical Rise/Fall Time	Tr/ Tf (20-80%)		400	8000	ps
Output Optical Eye	IUT-T G.957 Compliant

2 Receiver （T=25℃, Vcc=3~3.6V (+3.3V) 155M

Parameter			Symbol		Min.	Typ	Max.	Unit
Wavelength Range			lc		1100		1610	nm
Sensitivity	0~30km	155M	Pin	PMIN	-	-35	-34	dBm
MAX. Input Power (Saturation)			PMAX		-0	-	-
Signal Detect Assert			PA		-	-	-34
Signal Detect De-assert			PD		-44	-	-
Signal Detect Hysteresis			PHYS		1	-	4
Supply Current			ICCR		-	-	150	mA
Data Output Swing Differential			Vout		400	-	1000	mV
Signal Detect Voltage – High			VSDHC		2.0	-	VCC	V
Signal Detect Voltage – Low			VSDL		0	-	0.8

Notes:

switch from a high state to a low state.

1)Value of output power and sensitivity can be customized according to the demand

Ordering Information

Example

DSFP 3X 03-F 1 1 LC - 20

Sign	Mean	Description
DSFP	Module type	DSFP= Dual fibers SFP			SFP=Single fiber SFP
3X	Center wave	3X=1310tx/1100~1610 rx		5X=1550tx/1100~1610 rx		CWDM Like 49=1490 CWDM TX 1100~1610 RX
03	date Rate	03=155M	12=622M	24=1.25G		48=2.5G	60=3.125G
F	Laser type	F=FP		D=DFB		C=CWDM	V=VCSEL
1	Operating T	1=-20~+70℃		2=-40~+85℃
1	DDMI	1=NO DDM		2=DDMI
LC	Connector	SC=SC		LC=LC
20	Distance	022=220M		055=550M		5=5KM	10=10KM
		20=20KM		40=40KM		80=80KM	100=100KM

Typical products

Part No.	Wavelength	Con- nector	Temp.	TXPower (dBm)	RX Sens(Max.) (dBm)	DD MI	Distance
DSFP3X03-F11LC-20	T 1310FP/rx 1100~1610	LC	-20 to 70	-12 to-0	-34	F	20km

Designing notice

DSFP Pin description

Pin	Descriptions	Pin	Descriptions
1	VEET	Transmitter Ground (Common with Receiver Ground)	1
2	TFAULT	Transmitter Fault.	2
3	TDIS	Transmitter Disable. Laser output disabled on high or open.	3
4	MOD_DEF(2)	Module Definition 2. Data line for Serial ID.	4
5	MOD_DEF(1)	Module Definition 1. Clock line for Serial ID.	4
6	MOD_DEF(0)	Module Definition 0. Grounded within the module.	4
7	Rate Select	No connection required
8	LOS	Loss of Signal indication. Logic 0 indicates normal operation.	5
9	VEER	Receiver Ground (Common with Transmitter Ground)	1
10	VEER	Receiver Ground (Common with Transmitter Ground)	1
11	VEER	Receiver Ground (Common with Transmitter Ground)	1
12	RD-	Receiver Inverted DATA out. AC Coupled
13	RD+	Receiver Non-inverted DATA out. AC Coupled
14	VEER	Receiver Ground (Common with Transmitter Ground)	1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground (Common with Receiver Ground)	1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in. AC Coupled.
20	VEET	Transmitter Ground (Common with Receiver Ground)	1

Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)

SFP Host Board Mechanical Layout

Figure 6 SFP Host Board Mechanical Layout (Cont.)

Recommended Bezel Design

Product detail pictures:

Related Product Guide:
Evolutionary Innovation at the Heart of Ethernet Alliance OFC 2019 Demo | Second Hand Onu
Surveying the New Optical Form Factors for 400 Gigabit Ethernet | Single Fiber Sfp Module

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Ordinary Discount Gepon Olt Sfp - 155m Lc 1310nm Dual Fiber 20km Fiber Optic Transceiver Sfp Module – HDV , The product will supply to all over the world, such as: Portland, Lithuania, Italy, Our company absorbs new ideas, strict quality control, a full range of service tracking, and adhere to make high-quality products. Our business aims to "honest and trustworthy, favorable price, customer first", so we won the trust of the majority of customers! If you are interested in our products and services, please do not hesitate to contact us!

1.25g Sfp