1. TX Fault ndeye yakavhurika muunganidzi yakabuda, iyo inofanirwa kudhonzwa kumusoro ne 4.7k ~ 10kΩ resistor pane host board kune voltage pakati pe2.0V neVcc+0.3V. Logic 0 inoratidza kushanda kwakajairika; logic 1 inoratidza laser kukanganisa kweimwe mhando. Mune yakaderera mamiriro, iyo inobuda ichadhonzwa kune isingasviki 0.8V.
2. TX Disable inhomendi inoshandiswa kudzima transmitter optical output. Iyo inodhonzwa mukati memodule ine 4.7k ~ 10kΩ resistor. Nyika dzayo dzinoti:
Yakaderera (0~0.8V): Transmitter on
(> 0.8V, <2.0V): Zvisina kutsanangurwa
High (2.0~3.465V): Transmitter Yakaremara
Vhura: Transmitter Yakaremara
3. MOD-DEF 0,1,2 ndiwo mapini ekutsanangura module. Ivo vanofanirwa kudhonzwa ne4.7k ~ 10kΩ resistor pa
bhodhi rekugamuchira. Iyo yekudhonza-kumusoro voltage ichave VccT kana VccR.
MOD-DEF 0 yakavakirwa nemodule kuratidza kuti module iripo
MOD-DEF 1 ndiyo mutsara wewachi maviri waya serial interface yeserial ID
MOD-DEF 2 ndiyo mutsara wedata weviri waya serial interface yeserial ID
4. LOS ndiyo yakazaruka muunganidzi yakabuda, iyo inofanira kukweverwa kumusoro ne 4.7k ~ 10kΩ resistor pane bhodhi rinogamuchira kune voltage pakati pe 2.0V neVcc + 0.3V. Logic 0 inoratidza kushanda kwakajairika; logic 1 inoratidza kurasikirwa kwechiratidzo. Mune yakaderera mamiriro, iyo inobuda ichadhonzwa kune isingasviki 0.8V.
5. Aya ndiwo akasiyana anogamuchira akabuda. Iwo emukati AC-akabatana 100Ω mitsara yekusiyanisa iyo inofanirwa kugumiswa ne100Ω (yakasiyana) pamushandisi SERDES.
6. Aya ndiwo mapindiro anosiyanisa transmitter. Iwo ari AC-akabatana, mitsara yekusiyanisa ine 100Ω musiyano wekugumiswa mukati memodule.
RecommendedApplicationCircuit
Outline dhizaini (mm):
Kurairaruzivo :
Chikamu Nha. | Wavelength | Connector | Temp. | TX Simba (dBm) | RX Sens (Max.) (dBm) | Distance |
SFP+ -10G-SR | 850 | LC | 0~70°C | -9 kusvika-3 | no | <300m |
SFP+-10G-SR+ | 850 | LC | -10~85°C | -9 kusvika-3 | no |
Contact :
REV: | A |
DATE: | Nyamavhuvhu 30, 2012 |
Nyora ne: | Iyo kambani HDV phoelectron technology LTD |
Contact: | Room703, Nanshan mudunhu sainzi koreji dhorobha, Shenzhen, China |
WEB: | Http://www.hdv-tech.com |
Absolute Maximum Ratings
Parameter | Symbol | Min | Max | Unit | |
Storage Temperature | TS | -40 | +85 | ℃ | |
Operating Temperature | TOP | Commerce level | -20 | +70 | ℃ |
industry level | -40 | 85 | |||
Supply Voltage | VCC | -0.5 | +3.6 | V | |
Voltage pane Chero Pini | VIN | 0 | VCC | V | |
Soldering Temperature, Nguva | - | 260 ℃, 10 S | ℃,S |
Operation Environment
Parameter | Symbol | Min. | Typ | Max. | Unit | |
Ambient Temperature | TAMB | Commerce level | 0 | - | 70 | ℃ |
industry level | -10 | 85 | ||||
Power Supply Voltage | V CC-VEE | 3.15 | 3.3 | 3.45 | V | |
Kuparadza Simba | 1 | W | ||||
Data Rate | 10.3125 | Gbps |
Optical Characteristics
(Ambient Operating Temperature 0°C to +70°C, Vcc =3.3 V)
Parameter | Symbol | Min. | Typ. | Max. | Units |
Transmitter Chikamu | |||||
Center Wavelength | lo | 840 | 850 | 860 | nm |
RMS Spectral Width | Dl | - | - | 0.45 | dB |
Avhareji Yokubuda Simba | Po | -5 | - | -1 | dBm |
Extinction Ratio | Er | 3.0 | - | - | dB |
Kupararira Chirango | 3.9 | dB | |||
Relative Intensity Noise | RIN12OMA | -128 | dB/Hz | ||
Total jitter | Tj | IEEE 802.3ae | |||
Receiver Chikamu | |||||
Center Wavelength | lo | 850 | nm | ||
Receiver Sensitivity | Rsen | -11.5 | dBm | ||
Stressed Sensitivity | Rsen | -7.5 | dBm | ||
Receiver Overload | Rov | 0 | dBm | ||
Dzorera Kurasika | 12 | dB | |||
LOS Assert | LOSA | -25 | dBm | ||
LOS Dessert | LOSD | -15 | dBm | ||
LOS Hysteresis | 0.5 | 4 |
Electrical Characteristics
(Ambient Operating Temperature 0°C to +70°C, Vcc =3.3 V)
Parameter | Symbol | Min. | Typ. | Max. | unit | |
Transmitter Chikamu | ||||||
Input Differential Impendence | Zin | 90 | 100 | 110 | Ohm | |
Data Input Swing Differential | Vin | 180 | 700 | mV | ||
TX Disable | Disable | 2.0 | Vcc | V | ||
Enable | 0 | 0.8 | V | |||
TX Mhosva | Assert | 2.0 | Vcc | V | ||
Dessert | 0 | 0.8 | V | |||
ReceiverChikamu | ||||||
Output differential ipendence | Zout | 100 | Ohm | |||
Data yakabuda Swing Differential | Vout | 300 | 800 | mV | ||
Rx_LOS | Assert | 2.0 | Vcc | V | ||
Dessert | 0 | 0.8 | V |
Nzvimbo Dzakanyanya Kutsigirwa
Parameter | Symbol | Min. | Typ. | Max. | unit | |
Fiber Type | 850nm OFLBandWidth | |||||
62.5 um | 160MHz-km | 26 | m | |||
200MHz-km | 33 | m | ||||
50 um | 400MHz-km | 66 | m | |||
500MHz-km | 82 | m | ||||
2000MHz-km | 300 | m |
Diagnostics
Parameter | Range | Kururama | Unit | Calibration |
Tembiricha | -5 ~ 75 | ±3 | ºC | Internal |
Voltage | 0 ~ VCC | 0.1 | V | Internal |
Bias Current | 0 ~ 12 | 0.3 | mA | Internal |
Tx Power | -8 ~ 1 | ±1 | dBm | Internal |
Rx Simba | -18 ~ 0 | ±1 | dBm | Internal |
EEPROMZVINO(A0):
Addr | Saizi Yemunda (Bytes) | Zita reMunda | HEX | Tsanangudzo |
0 | 1 | Identifier | 03 | SFP |
1 | 1 | Ext. Identifier | 04 | MOD4 |
2 | 1 | Connector | 07 | LC |
3-10 | 8 | Transceiver | 10 00 00 00 00 00 00 00 | Transmitter Code |
11 | 1 | Encoding | 06 | 64B66B |
12 | 1 | BR, nezita | 67 | 10000M bps |
13 | 1 | Reserved | 00 | |
14 | 1 | Kureba (9um)-km | 00 | |
15 | 1 | Kureba (9um) | 00 | |
16 | 1 | Kureba (50um) | 08 | |
17 | 1 | Kureba (62.5um) | 02 | |
18 | 1 | Hurefu (copper) | 00 | |
19 | 1 | Reserved | 00 | |
20-35 | 16 | Zita remutengesi | 48 44 56 20 20 20 20 20 20 20 20 20 20 20 20 20 | HDV |
36 | 1 | Reserved | 00 | |
37-39 | 3 | Mutengesi OUI | 00 00 00 | |
40-55 | 16 | Mutengesi PN | xx xx xx xx xx xx xx xx xx xx xx xx | ASC II |
56-59 | 4 | Mutengesi rev | 31 2E 30 20 | V1.0 |
60-61 | 2 | Wavelength | 03 52 | 850nm |
62 | 1 | Reserved | 00 | |
63 | 1 | CC BASE | XX | Tarisa huwandu hwebyte 0 ~ 62 |
64-65 | 2 | Options | 00 1A | LOS, TX_DISABLE, TX_FAULT |
66 | 1 | BR, max | 00 | |
67 | 1 | BR, min | 00 | |
68-83 | 16 | Mutengesi SN | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | Zvisina kutaurwa |
84-91 | 8 | Mutengesi date code | XX XX XX 20 | Gore, Mwedzi, Zuva |
92-94 | 3 | Reserved | 00 | |
95 | 1 | CC_EXT | XX | Tarisa huwandu hwebyte 64~94 |
96-255 | 160 | Mutengesi chaiwo |
PinTsanangudzo:
Pini | Zita | Discription | CHERECHEDZA |
1 | VeeT | Transmitter Ground | |
2 | Tx Fault | Transmitter Fault Chiratidzo | 1 |
3 | Tx Disable | Transmitter Disable | 2 |
4 | MOD DEF2 | Module Tsanangudzo 2 | 3 |
5 | MOD DEF1 | Tsanangudzo yeModule 1 | 3 |
6 | MOD DEF0 | Module Tsanangudzo 0 | 3 |
7 | RS0 | Haina Kubatanidzwa | |
8 | LOS | Kurasika Kwechiratidzo | 4 |
9 | RS1 | Haina Kubatanidzwa | |
10 | VeeR | Receiver Ground | |
11 | VeeR | Receiver Ground | |
12 | RD- | Inv. Received Data Output | 5 |
13 | RD+ | IReceived Data Output | 5 |
14 | VeeR | Receiver Ground | |
15 | VccR | Receiver Simba | |
16 | VccT | Transmitter Power | |
17 | VeeT | Transmitter Ground | |
18 | TD+ | Tumira Data Input | 6 |
19 | TD- | Inv. Tumira Data Input | 6 |
20 | VeeT | Transmitter Ground |