● HUR3102XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access.
● HUR3102XR is based on mature and stable, cost-effective XPON technology.
● HUR3102XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
● Support EPON/GPON mode and switch mode automatically
● Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
● Support IPv4 and IPv6 Dual mode
● Support 2.4G WIFI 802.11 b/g/n and 2*2 MIMO
● Support CATV interface for Video Service and remote control by Major OLT
● Support LAN IP and DHCP Server configuration
● Support SIP Protocol for VoIP Service
● Support Port Mapping and Loop-Detect
● Support Firewall function and ACL function
● Support IGMP Snooping/Proxy multicast feature
● Support TR069 remote configuration and mainte-nance
● Specialized design for system breakdown preven- tion to maintain stable system
HARDWARE SPECIFICATION
| Technical item | Details |
| PON Interface | 1 GPON BOB （Bosa on Board）Receiving sensitivity: ≤-27dBmTransmitting optical power: 0~+5dBmTransmission distance: 20KM |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/APC Connector |
| Chip Spec | RTL9603C,DDR2 128MB |
| Flash | SPI Nor Flash 16MB /SPI Nand flash 1Gbit |
| LAN Interface | 1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptiveEthernet interfaces. Full/Half, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n,Operating frequency: 2.400-2.4835GHzsupport MIMO, rate up to 300Mbps,2T2R,2 external antenna 5dBi,Support: Multiple SSID
Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
| POTS interface | 1 FXS, RJ11 connectorSupport: G.711/G.723/G.726/G.729 codecSupport: T.30/T.38/G.711 Fax mode, DTMF RelayLine testing according to GR-909 |
| LED | 11 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN4、Worn、 Normal(CATV) |
| Push-Button | 3,For Function of Factory Reset, WLAN, WPS |
| Operating Condition | Temperature: 0℃~+50℃Humidity: 10%～90%（non-condensing） |
| Storing Condition | Temperature: -30℃~+60℃Humidity: 10%~90%（non-condensing） |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 180mm×107mm×28mm（L×W×H） |
| Net Weight | 0.2Kg |
PANEL LIGHTS INTRODUCTION
| Pilot Lamp | Status | Description |
| WIFI | On | The WIFI interface is up |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| PWR | On | The device is powered up. |
| Off | The device is powered down | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT) | |
| Off | Port (LANx) connection exception or not connected | |
| PON | On | The device has registered to the PON system |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| FXS | On | Phone has registered to the SIP Server. |
| Blink | one has registered and data transmission (ACT). | |
| Off | Phone registration is incorrect. |
APPLICATION
● Typical Solution：FTTH(Fiber To The Home
● Typical Business：INTERNET、IPTV 、VOIP、WIFI etc
Products categories
Write your message here and send it to us