Lintlha:
1. Sebaka sa potoloho se arotsoe ka hare ho sebaka sa chassis.
2. TFAULTis mokelli o bulehileng / tlhahiso ea ho ntša metsi, e lokelang ho huloa ka 4.7k - 10k Ohms resistor holim'a boto ea baeti haeba e reretsoe.
2. TFAULTis mokelli o bulehileng / tlhahiso ea ho ntša metsi, e lokelang ho huloa ka 4.7k - 10k Ohms resistor holim'a boto ea baeti haeba e reretsoe.
bakeng sa tshebediso. Matla a ho hula e lokela ho ba pakeng tsa 2.0V ho Vcc + 0.3V. Phaello e phahameng e bonts'a phoso ea transmitter e bakoang ke leeme la TX
hona joale kapa matla a tlhahiso ea TX a fetang litekanyo tse behiloeng esale pele. Phaello e tlase e bonts'a ts'ebetso e tloaelehileng. Boemong bo tlaase, the
tlhahiso e huleloa ho 2.0V kapa e butsoe, e nolofalitsoe ho TDIS <0.8V.
4. E lokela ho huloa ka 4.7k - 10 kohms ka boto ea baeti ho ea ho motlakase o pakeng tsa 2.0V le 3.6V.
tlhahiso e huleloa ho 2.0V kapa e butsoe, e nolofalitsoe ho TDIS <0.8V.
4. E lokela ho huloa ka 4.7k - 10 kohms ka boto ea baeti ho ea ho motlakase o pakeng tsa 2.0V le 3.6V.
MOD_DEF(0) e hula mola tlase ho bonts'a hore mojule o kentsoe.
5. LOS ke tlhahiso e bulehileng ea mokelli. E lokela ho huloa ka 4.7k - 10 kohms ho board board ho motlakase o pakeng tsa 2.0V le 3.6V. Logic 0
5. LOS ke tlhahiso e bulehileng ea mokelli. E lokela ho huloa ka 4.7k - 10 kohms ho board board ho motlakase o pakeng tsa 2.0V le 3.6V. Logic 0
e bontša ts'ebetso e tloaelehileng; logic 1 e bontša tahlehelo ea lets'oao.
Setšoantšo sa 2 Mohlala oa SFP Host Board Schematic
Setšoantšo sa 3 Recommended Board Board Supply Filtering Network
Small Form-Factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)
Setšoantšo sa 4 SFP Host Board Mechanical Layout
Setšoantšo sa 5 SFP Host Board Mechanical Layout (Tsoelang pele)
Setšoantšo sa 6 Moqapi oa Bezel o khothalelitsoeng
| Karolo No. | Wavelength | Sehokedi | Temp. | Matla a TX (dBm) | RX Sens (Boholo.) (dBm) | Sebaka |
| SFP3524-F11LC-20 | T 1310FP/R 1550 | LC | - ho tloha ho 20 ho isa ho 70 | -9 ho isa ho 3 | -21 | 20km |
| SFP5324-D11LC-20 | T 1550DFB/R 1310 | LC | - ho tloha ho 20 ho isa ho 70 | -15 ho isa ho 3 | -21 | |
| SFP5324-D11LC-40 | T 1550DFB/R 1310 | LC | - ho tloha ho 20 ho isa ho 70 | -9 ho isa ho 3 | -24 | 40km |
| SFP3524-D11LC-40 | T 1310DFB/R 1550 | LC | - ho tloha ho 20 ho isa ho 70 | -5 ho isa-0 | -24 | |
| SFP5424-D11LC-80 | T 1550DFB/R 1310 | LC | - ho tloha ho 20 ho isa ho 70 | -3 ho isa ho 2 | -26 | 80km |
| SFP4524-D11LC-80 | T 1490DFB/R 1550 | LC | - ho tloha ho 20 ho isa ho 70 | -3 ho isa ho 2 | -26 |
Lintlha tsa ho Odara:
Mohlala
SFP 35 24 -F 1 1 LC-20
SFP 35 24 -F 1 1 LC-20
| Letshoao | Bolela | Tlhaloso | |||||
| SFP | Mofuta oa module | SFP=SFP ea faeba e le 'ngoetransceiver | |||||
| 35 | Leqhubu la bohareng | 35=1310tx/1550rx | 53=1550tx/1310rx | 45=1490tx/1550rx | 54=1550tx/1490rx | ||
| 24 | Sekhahla sa Transmitter | 03=155M | 03=622M | 24=1.25G | 48=2.5G | 60=3.125G | |
| F | Mofuta oa laser | F=FP | D=DFB | C=CWDM | V=VCSEL | ||
| 1 | Ts'ebetso ea T | 1=0~+70℃ | 2=-40~+85℃ | ||||
| 2 | DDMI | 1=HA HO DDM | 2=DDMI | ||||
| LC | Sehokedi | SC=SC | LC=LC | ||||
| 20 | Sebaka | 022=220M | 055=550M | 5=5KM | 10=10KM | ||
| 20=20KM | 40=40KM | 80=80KM | 100=100KM | ||||
Lintlha tse phahameng ka ho Fetisisa:
| Paramethara | Letšoao | Min | Max | Yuniti | |
| Mocheso oa polokelo | TS | -40 | +85 | ℃ | |
| Mocheso oa ho sebetsa | HLOMPHO | Boemo ba khoebo | -20 | +70 | ℃ |
| boemo ba indasteri | -40 | 85 | |||
| Phepelo ea Voltage | VCC | -0.5 | +4,5 | V | |
| Voltage ho Pin efe kapa efe | VIN | 0 | VCC | V | |
| Mocheso oa Soldering, Nako | - | 260 ℃, 10 S | ℃, S | ||
Maemo a Ts'ebetso a khothalelitsoeng:
| Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | |
| Ambient Mocheso | TABI | Boemo ba khoebo | 0 | - | 70 | ℃ |
| boemo ba indasteri | -40 | 85 | ||||
| Matla a Phepelo ea Matla | V CC-VEE | 3 | 3.3 | 3.6 | V | |
Maemo a Ts'ebetso:
1. Transmitter(T=25℃, Vcc=3~3.6V (+3.3V))
| Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | |||||
| Bohareng ba Wavelength | lc | 1520 | 1550 | 1580 | nm | |||||
| 1280 | 1310 | 1340 | ||||||||
| 1470 | 1490 | 1510 | ||||||||
| Bophara ba Spectral | △l | FP @RMS | - | 2 | 4 | nm | ||||
| DFB@-20dB FWHM | - | - | 1 | |||||||
| Matla a Output | 0-20km | 1.25G | 1310 FP | Po | -9 | - | -3 | dBm | ||
| 14/15 DFB | -15 | -3 | ||||||||
| 40km | 1.25G | 14/15 DFB | -9 | - | -3 | |||||
| 1310 DFB | -5 | -0 | ||||||||
| 60km | 1.25G | 14/15 DFB | -5 | 0 | ||||||
| 80km | 1.25G | 14/15 DFB | -3 | 2 | ||||||
| 100 ~ 120km | 1.25G | 14/150 DFB | 0 | 3 | ||||||
| Karolelano ea Phello | ER | 9 | - | dB | ||||||
| Phepelo ea Hona Joale | ICCT | - | 150 | mA | ||||||
| Kena Phapano ea Impedans | Rin | 100 | Ω | |||||||
| Phapang ea Kenyelletso ea data | Vin | 300 | 1200 | mV | ||||||
| Optical Modulation Amplitude | OMA | 174 | μW | |||||||
| Fetisetsa Disable Voltage | VD | 2.0 | Vcc | V | ||||||
| Fetisetsa Enable Voltage | VEN | 0 | 0.8 | V | ||||||
| Fetisetsa Thibela Assert Nako | 10 | us | ||||||||
| Nako ea Optical Rise/ Fall | 1.25G | Tr/ Tf (20-80%) | 150 | 260 | ps | |||||
| Tlatsetso ea Jitter ea Deterministic | TX ΔDJ | 20 | 56.5 | ps | ||||||
| Kakaretso ea Tlatsetso ea Jitter | TX ΔTJ | 50 | 119 | ps | ||||||
2. Moamoheli （T=25℃, Vcc=3~3.6V (+3.3V)
| Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | |||
| Wavelength Range | lc | 1520 | 1550 | 1580 | nm | |||
| 1280 | 1310 | 1340 | ||||||
| 1470 | 1490 | 1510 | ||||||
| Kutloelo-bohloko | 20km | 1.25G | Pin | PMIN | - | - | -21 | dBm |
| 40/60km | 1.25G | Pin | - | - | -24 | |||
| 80km | 1.25G | Pin | - | - | -26 | |||
| 100km | 1.25G | APD | -30 | |||||
| 120km | 1.25G | APD | -32 | |||||
| MAX. Kena Matla (Saturation) | PMAX | -3 | - | - | ||||
| Phatlalatso ea ho Tseba Letšoao | PA | - | - | -24 | ||||
| Letšoao la Letšoao la ho hlakola | PD | -45 | - | - | ||||
| Letšoao la ho lemoha Hysteresis | PHYS | 1 | - | 4 | ||||
| Phepelo ea Hona Joale | ICCR | - | - | 150 | mA | |||
| Phapang ea Phapang ea Tlhahiso ea data | Hlakola | 400 | - | 1000 | mV | |||
| Signal Detect Voltage - Holimo | VSDHC | 2.0 | - | VCC | V | |||
| Signal Fumana Voltage - Tlase | VSDL | 0 | - | 0.8 | ||||
Lintlha:
fetoha ho tloha boemong bo phahameng ho ya boemong bo tlase.
1) Boleng ba matla a tlhahiso le kutloisiso li ka etsoa ho latela tlhoko.
1) Boleng ba matla a tlhahiso le kutloisiso li ka etsoa ho latela tlhoko.
Mosebetsi oa Pin:
| Pin | Litlhaloso | Pin | Litlhaloso |
| 1 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) | 1 |
| 2 | TLHOKOMELISO | Phoso ea Transmitter. | 2 |
| 3 | TDIS | Transmitter Disable. Laser e koetsoe ka holimo kapa e butsoe. | 3 |
| 4 | MOD_DEF(2) | Tlhaloso ea Mojule 2. Mohala oa data bakeng sa ID ea Serial. | 4 |
| 5 | MOD_DEF(1) | Tlhaloso ea Mojule 1. Mohala oa oache oa Serial ID. | 4 |
| 6 | MOD_DEF(0) | Tlhaloso ea Mojule 0. E thehiloe ka har'a mojule. | 4 |
| 7 | Rate Khetha | Ha ho khokahano e hlokahalang | |
| 8 | TLHOKOMELO | Tahlehelo ya Pontsho ya Letshwao. Logic 0 e bontša ts'ebetso e tloaelehileng. | 5 |
| 9 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
| 10 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
| 11 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
| 12 | RD- | Receiver e Inverted DATA kantle. AC e kopantsoe | |
| 13 | RD+ | Receiver DATA e sa kengoang e tsoile. AC e kopantsoe | |
| 14 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
| 15 | VCCR | Phepelo ea Matla a Receiver | |
| 16 | VCCT | Phepelo ea Matla a Transmitter | |
| 17 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) | 1 |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Couped. | |
| 19 | TD- | Transmitter Inverted DATA in. AC Couped. | |
| 20 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) | 1
|
- 1X kanale ea fiber
- Sistimi ea ho shebella video
- Mokhoa oa puisano oa mehala
Lihlopha tsa lihlahisoa
Ngola molaetsa wa hao mona mme o re romele wona