Lintlha:
1. TX Fault ke sehlahisoa se bulehileng sa pokello, se lokelang ho huleloa ka 4.7k ~ 10kΩ resistor holim'a boto ea baeti ho ea ho motlakase.
pakeng tsa2.0V le Vcc+0.3V. Logic 0 e bontša ts'ebetso e tloaelehileng; logic 1 e bontša phoso ea laser ea mofuta o itseng. Boemong bo tlase,
tlhahiso e tla huleloa ka tlase ho 0.8V.
2. TX Disable ke sesebelisoa se sebelisetsoang ho koala transmitter optical output. E huloa ka har'a mojule
e na le sehanyetsi sa 4.7k ~ 10kΩ. Maemo a eona ke:
Tlase (0~0.8V): Transmitter e butswe
(>0.8V, <2.0V): Ha e hlalosoe
Holimo (2.0 ~ 3.465V): Transmitter E holofetse
Bula: Transmitter E holofetse
3. MOD-DEF 0,1,2 ke lintlha tse hlalosang li-module. Li lokela ho huleloa ka sehanyetsi sa 4.7k~10kΩ se buletsoe
boto ea baeti. Matla a ho hula e tla ba VccT kapa VccR.
MOD-DEF 0 e thehiloe ke mojule ho bontša hore mojule o teng
MOD-DEF 1 ke mohala oa oache oa sehokelo sa terata tse peli bakeng sa serial ID
MOD-DEF 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa serial ID
4. LOS ke tlhahiso e bulehileng ea mokelli, e lokelang ho huloa ka 4.7k ~ 10kΩ resistor holim'a boto ea baeti ho ea ho motlakase.
(>0.8V, <2.0V): Ha e hlalosoe
Holimo (2.0 ~ 3.465V): Transmitter E holofetse
Bula: Transmitter E holofetse
3. MOD-DEF 0,1,2 ke lintlha tse hlalosang li-module. Li lokela ho huleloa ka sehanyetsi sa 4.7k~10kΩ se buletsoe
boto ea baeti. Matla a ho hula e tla ba VccT kapa VccR.
MOD-DEF 0 e thehiloe ke mojule ho bontša hore mojule o teng
MOD-DEF 1 ke mohala oa oache oa sehokelo sa terata tse peli bakeng sa serial ID
MOD-DEF 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa serial ID
4. LOS ke tlhahiso e bulehileng ea mokelli, e lokelang ho huloa ka 4.7k ~ 10kΩ resistor holim'a boto ea baeti ho ea ho motlakase.
pakeng tsa2.0Vand Vcc+0.3V. Logic 0 e bontša ts'ebetso e tloaelehileng; logic 1 e bontša tahlehelo ea lets'oao. Boemong bo tlaase, the
tlhahiso e tla huleloa ka tlase ho 0.8V.
5. Tsena ke lihlahisoa tse fapaneng tsa moamoheli. Ke mela e fapaneng ea AC-couplated 100Ω e lokelang ho felisoa
ka 100Ω (phapang) ho mosebelisi SERDES.
6. Tsena ke lisebelisoa tse fapaneng tsa transmitter. Ke mela e kopantsoeng ea AC, e fapaneng e nang le phapang ea 100Ω ka har'a mojule.
6. Tsena ke lisebelisoa tse fapaneng tsa transmitter. Ke mela e kopantsoeng ea AC, e fapaneng e nang le phapang ea 100Ω ka har'a mojule.
Sebaka sa Kopo se khothalelitsoeng:
Setšoantšo sa setšoantšo (mm):
Lintlha tsa ho odara :
| Karolo No. | Wavelength | Sehokedi | Temp. | TX Matla (dBm) | RX Sens (Boholo.) (dBm) | Sebaka |
| BSFP+-10G-L10A | 1270TX/1330RX | LC | 0~70°C | -5 ho isa ho 0 | -14 | 10km |
| BSFP+-10G-L10B | 1330TX/1270RX | LC | 0~70°C | -5 ho isa ho 0 | -14 | 10km |
| BSFP+-10G-L20A | 1270TX/1330RX | LC | 0~70°C | -2 ho ea ho 3 | -14 | 20km |
| BSFP+-10G-L20B | 1330TX/1270RX | LC | 0~70°C | -2 ho ea ho 3 | -14 | 20km |
| BSFP+-10G-L40A | 1270TX/1330RX | LC | 0~70°C | +1 ho isa ho +5 | -17 | 40km |
| BSFP+-10G-L40B | 1330TX/1270RX | LC | 0~70°C | +1 ho isa ho +5 | -17 | 40km |
| BSFP+-10G-L60A | 1270TX/1330RX | LC | 0~70°C | +1 ho isa ho +6 | -20 | 60km |
| BSFP+-10G-L60B | 1330TX/1270RX | LC | 0~70°C | +1 ho isa ho +6 | -20 | 60km |
Lintlha tse phahameng ka ho Fetisisa:
| Paramethara | Letšoao | Min | Max | Yuniti | |
| Mocheso oa polokelo | TS | -40 | +85 | ℃ | |
| Mocheso oa ho sebetsa | HLOMPHO | Boemo ba khoebo | -20 | +70 | ℃ |
| boemo ba indasteri | -40 | 85 | |||
| Phepelo ea Voltage | VCC | -0.5 | +3,6 | V | |
| Voltage ho Pin efe kapa efe | VIN | 0 | VCC | V | |
| Mocheso oa Soldering, Nako | - | 260 ℃, 10 S | ℃, S | ||
Tikoloho ea Ts'ebetso:
| Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | |
| Ambient Mocheso | TABI | Boemo ba khoebo | 0 | - | 70 | ℃ |
| boemo ba indasteri | -40 | 85 | ||||
| Matla a Phepelo ea Matla | V CC-VEE | 3.15 | 3.3 | 3.45 | V | |
| Ho felloa ke Matla | 1 | W | ||||
| Sekhahla sa Lintlha | 10GBASE-LR | 10.3125 | Gbps | |||
Litšobotsi tsa Optical:
(Ambient Operating Temperature 0C to +70C, Vcc =3.3 V)
| Paramethara | Letšoao | Min. | Tlanya. | Max. | Diyuniti | ||||
| Karolo ea Transmitter | |||||||||
| Bohareng ba Wavelength | lo | 1260 | 1270 | 1280 | nm | ||||
| 1320 | 1330 | 1340 | |||||||
| RMS Spectral Width | Dl | - | - | 1 | nm | ||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||||||
| Karolelano ea Matla a Output | 10km | Po | -5 | - | 0 | dBm | |||
| 20km | -2 | +3 | |||||||
| 40km | +1 | +5 | |||||||
| 60km | +1 | +6 | |||||||
| Karolelano ea Phello | Er | 3.5 | - | - | dB | ||||
| Kotlo ea Phatlalatso | 2 | dB | |||||||
| Kena Phapano ea Impedans | Zin | 90 | 100 | 110 | Ω | ||||
| Lerata le Matla a Batlang | RIN12OMA | -128 | dB/Hz | ||||||
| Kakaretso ea jitter | Tj | 0.28 | UI(pp) | ||||||
| Karolo ea Moamoheli | |||||||||
| Bohareng ba Wavelength | lo | 1320 | 1330 | 1340 | nm | ||||
| 1260 | 1270 | 1280 | |||||||
| Boikutlo ba ho amohela | 10km | Rsen | -14 | dBm | |||||
| 20km | -14 | ||||||||
| 40km | -17 | ||||||||
| 60km APD | -23 | ||||||||
| Moamoheli o Felletseng | 0-40km | Rov | 0.5 | dBm | |||||
| 60KM | -6 | ||||||||
| Khutlisa Tahlehelo | 12 | dB | |||||||
| Tsebo ea LOS | TLHOKOMELOA | -25 | dBm | ||||||
| Sejo se monate sa LOS | TLHOKOMELOD | -15 | dBm | ||||||
| LOS Hysteresis | 0.5 | 4 | dB | ||||||
| TLHOKOMELO | Phahameng | 2.0 | VCC+0.3 | V | |||||
| Tlase | 0 | 0.8 | |||||||
Litšobotsi tsa Motlakase:
(Ambient Operating Temperature 0C to +70C, Vcc =3.3 V)
| Paramethara | Letšoao | Min. | Tlanya. | Max. | unit | |
| Karolo ea Transmitter | ||||||
| Kena Phapano ea Boipuso | Zin | 90 | 100 | 110 | Ohm | |
| Phapang ea Kenyelletso ea data | Vin | 180 | 700 | mV | ||
| TX Tlosa | Thibela | 2.0 | Vcc | V | ||
| Thusa | 0 | 0.8 | V | |||
| TX Phoso | Boikemisetso | 2.0 | Vcc | V | ||
| Sejo se monate | 0 | 0.8 | V | |||
| MoamoheliKarolo | ||||||
| Phapang ea sephetho | Tloha | 100 | Ohm | |||
| Tlhahiso ea data Swing Differential | Hlakola | 300 | 800 | mV | ||
| Rx_LOS | Boikemisetso | 2.0 | Vcc | V | ||
| Sejo se monate | 0 | 0.8 | V | |||
Tlhahlobo:
| Paramethara | Range | Ho nepahala | Yuniti | Tekanyetso |
| Mocheso | -5 ho isa ho 75 | ±3 | ºC | Ka hare |
| Palo ea li-volts | 0 ~ VCC | 0.1 | V | Ka hare |
| Leeme la Hona Joale | 0 ~ 12 | 0.3 | mA | Ka hare |
| Tx Matla | -8 ~ 1 | ±1 | dBm | Ka hare |
| Matla a Rx | -18 ~ 0 | ±1 | dBm | Ka hare |
tlhahisoleseling ea EEPROM (A0):
| Addr | Boholo ba Tšimo (Bayte) | Lebitso la Tšimo | HEX | Tlhaloso |
| 0 | 1 | Sekhetho | 03 | SFP |
| 1 | 1 | Ext. Sekhetho | 04 | MOD4 |
| 2 | 1 | Sehokedi | 07 | LC |
| 3-10 | 8 | Transceiver | 10 00 00 00 00 00 00 00 | Khoutu ea Transmitter |
| 11 | 1 | Khouto | 06 | 64B66B |
| 12 | 1 | BR, ka lebitso | 67 | 10000M bps |
| 13 | 1 | Reserved | 00 | |
| 14 | 1 | Bolelele (9um)-km | 00 | |
| 15 | 1 | Bolelele (9um) | 00 | |
| 16 | 1 | Bolelele (50um) | 08 | |
| 17 | 1 | Bolelele (62.5um) | 02 | |
| 18 | 1 | Bolelele (koporo) | 00 | |
| 19 | 1 | Reserved | 00 | |
| 20-35 | 16 | Lebitso la morekisi | 48 44 56 20 20 20 20 20 20 20 20 20 20 20 20 20 | HDV |
| 36 | 1 | Reserved | 00 | |
| 37-39 | 3 | Morekisi OUI | 00 00 00 | |
| 40-55 | 16 | Morekisi PN | xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx | ASC II |
| 56-59 | 4 | Morekisi rev | 31 2E30 20 | V1.0 |
| 60-61 | 2 | Wavelength | 05 1E | 1310nm |
| 62 | 1 | Reserved | 00 | |
| 63 | 1 | CC BASE | XX | Sheba kakaretso ea byte 0~62 |
| 64-65 | 2 | Dikgetho | 00 1A | LOS, TX_DISABLE, TX_FAULT |
| 66 | 1 | BR, max | 00 | |
| 67 | 1 | BR, mots | 00 | |
| 68-83 | 16 | Morekisi SN | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | E sa hlalosoang |
| 84-91 | 8 | Khoutu ea letsatsi la morekisi | XX XX XX 20 | Selemo, Khoeli, Letsatsi |
| 92-94 | 3 | Reserved | 00 | |
| 95 | 1 | CC_EXT | XX | Sheba kakaretso ea byte 64~94 |
| 96-255 | 160 | Morekisi ka ho khetheha |
| Lithako | Lebitso | Tlhaloso | HLOKOMELA |
| 1 | VeeT | Sebaka sa Transmitter | |
| 2 | Tx Phoso | Letšoao la Phoso ea Transmitter | 1 |
| 3 | Tx Tlosa | Transmitter Disable | 2 |
| 4 | MOD DEF2 | Tlhaloso ea Mojule 2 | 3 |
| 5 | MOD DEF1 | Tlhaloso ea Mojule 1 | 3 |
| 6 | MOD DEF0 | Tlhaloso ea Mojule 0 | 3 |
| 7 | RS0 | Ha e Kopanetsoe | |
| 8 | TLHOKOMELO | Tahlehelo ya Letshwao | 4 |
| 9 | RS1 | Ha e Kopanetsoe | |
| 10 | VeeR | Sebaka sa Moamoheli | |
| 11 | VeeR | Sebaka sa Moamoheli | |
| 12 | RD- | Inv. Sephetho se Amohetseng Data | 5 |
| 13 | RD+ | IReceived Data Output | 5 |
| 14 | VeeR | Sebaka sa Moamoheli | |
| 15 | VccR | Matla a ho amohela | |
| 16 | VccT | Matla a ho fetisa | |
| 17 | VeeT | Sebaka sa Transmitter | |
| 18 | TD+ | Fetisetsa Kenyeletso ya Boitsebiso | 6 |
| 19 | TD- | Inv. Fetisetsa Kenyeletso ya Boitsebiso | 6 |
| 20 | VeeT | Sebaka sa Transmitter |
10GBASE-LR ho 10.31Gbps
10GBASE-LW ho 9.95Gbps
0.6 ~ 10Gb / s CPRI/OBSAI
Sehokelo se seng sa Optical
Lihlopha tsa lihlahisoa
-
10G 1550nm 40KM LC sehokedi se le seng sa fiber optic S...
-
Huawei/cisco e Tsamaellana le 10g Sfp+ lr 10km 10g Sf...
-
10g Sfp+ Dual Fiber Sm 1310nm 10km 10g Lr Optic...
-
10G 1310nm 20KM LC sehokedi se le seng sa fiber optic S...
-
SFP-10G-SR SFP+ 10g 850nm 300m ddm SFP module
-
10g Spf+ 850nm Mode Dual Fiber 300m Optical Mod...
Ngola molaetsa wa hao mona mme o re romele wona