*HUR4101XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
2. Functional Feature
*Support EPON/GPON mode and switch mode automatically
Technical item
|
Details
|
PON Interface
|
1 GPON BoB(Bosa on Board)
|
Receiving sensitivity: ≤-27dBm
|
|
Transmitting optical power: +1~+4dBm
|
|
Transmission distance: 20KM
|
|
Wavelength
|
TX: 1310nm, RX: 1490nm
|
Optical Interface
|
SC/APC Connector
|
Design Scheme
|
RTL9607C+RTL8192FR(2.4G)+RTL8812FR(5G)+Si32192 BOB(RTL8290B)
|
RAM
|
2Gbit DDR3
|
Flash
|
1Gbit SPI NAND Flash
|
LAN Interface
|
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
|
Wireless
|
Compliant with IEEE802.11b/g/n,ac
|
2.4G Operating frequency:2.400-2.4835GHz
|
|
5.8G Operating frequency:5.150-5.825GHz
|
|
2.4G 2*2 MIMO, rate up to 300Mbps
|
|
5.8G 2*2 MIMO ,rate up to 867Mbps
|
|
4 external antennas 5dBi
|
|
Support Multiple SSID
|
|
POTS interface
|
FXS, RJ11 connector
|
Support: G.711/G.723/G.726/G.729 codec
|
|
Support: T.30/T.38/G.711 Fax mode, DTMF Relay
|
|
Line testing according to GR-909
|
|
CATV Interface
|
RF, WDM, optical power : +2~-15dBm
|
Optical reflection loss: ≥45dB
|
|
Optical receiving wavelength: 1550±10nm
|
|
RF frequency range: 47~1000MHz, RF output impedance: 75Ω
|
|
RF output level: 78dBuV
|
|
AGC range: -13~+1dBm
|
|
MER: ≥32dB@-15dBm
|
|
USB
|
Standard USB2.0
|
LED
|
11 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G
Worn、 Normal(CATV) |
Push-Button
|
2 ,For Function of Reset and WPS
|
Operating Condition
|
Temperature: 0℃~+50℃
|
Humidity: 10%~90%(non-condensing)
|
|
Storing Condition
|
Temperature: -30℃~+60℃
|
Humidity: 10%~90%(non-condensing)
|
|
Power Supply
|
DC 12V/1A
|
Power Consumption
|
≤6W
|
Dimension
|
260mm×158mm×192mm(L×W×H)
|
Net Weight
|
0.35Kg
|
Storing Condition
|
Temperature: -30℃~+60℃
|
Pilot Lamp
|
Status
|
Description
|
PWR
|
On
|
The device is powered up.
|
Off
|
The device is powered down.
|
|
LOS
|
Blink
|
The device doses not receive optical signals or with low signals.
|
Off
|
The device has received optical signal.
|
|
PON
|
On
|
The device has registered to the PON system.
|
Blink
|
The device is registering the PON system.
|
|
Off
|
The device registration is incorrect.
|
|
LAN1~LAN4
|
On
|
Port (LANx) is connected properly (LINK).
|
Blink
|
Port (LANx) is sending or/and receiving data (ACT).
|
|
Off
|
Port (LANx) connection exception or not connected.
|
|
2.4G
|
On
|
2.4G WIFI interface up
|
Blink
|
2.4G WIFI is sending or/and receiving data (ACT).
|
|
Off
|
2.4G WIFI interface down
|
|
5.8G
|
On
|
5G WIFI interface up
|
Blink
|
5G WIFI is sending or/and receiving data (ACT).
|
|
Off
|
5G WIFI interface down
|
|
Worn
(CATV) |
On
|
Input optical power is higher than 3dbm or lower than -15dbm
|
Off
|
Input optical power is between -15dbm and 3dbm
|
|
Normal
(CATV) |
On
|
Input optical power is between -15dbm and 3dbm
|
Off
|
Input optical power is higher than 3dbm or lower than -15dbm
|
5.Application
Typical Solution:FTTH(Fiber To The Home)