Wholesale Price China 10gb Transceiver Sfp Lr - 1.25G 20KM 1310nm Dual Fiber Single mode SFP module – HDV Detail:
Applications
Switch
Video monitor system Telecommunication system
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | |
| Storage Temperature | TS | -40 | +85 | ℃ | |
| Operating Temperature | TOP | Commercial level | -20 | +70 | ℃ |
| industrial level | -40 | 85 | |||
| Supply Voltage | VCC | -0.5 | +4.5 | V | |
| Voltage on Any Pin | VIN | 0 | VCC | V | |
| Soldering Temperature ,Time | - | 260℃, 10 S | ℃,S | ||
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typ | Max. | Unit | |
| Ambient Temperature | TAMB | Commercial level | 0 | - | 70 | ℃ |
| industrial level | -40 | 85 | ||||
| Power Supply Voltage | V CC-VEE | 3 | 3.3 | 3.6 | V | |
Operating Conditions
1 Transmitter（T=25℃, Vcc=3~3.6V (+3.3V)） 1.25G
| Parameter | Symbol | Min. | Typ | Max. | Unit | |||
| Center Wavelength | lc | FP OR DFB | 1520 | 1550 | 1580 | nm | ||
| 1280 | 1310 | 1340 | ||||||
| CWDM | l-6 | l(note1) | l+6 | |||||
| Spectral width | △l | FP@RMS | - | 1 | 2 | nm | ||
| DFB@-20dBFWHM | - | - | 1 | |||||
| Side Mode Suppression Ratio | SMSR (DFB only) | 30 | dB | |||||
| Output Power | 0~20km | 1310 FP | Po | -9 | - | -3 | dBm | |
| 20km | 1550 DFB | -9 | - | -0 | ||||
| CWDM |
-9 |
- |
-0 |
||||
| 40km | 1550 DFB |
-5 |
0 |
||||
| CWDM |
-5 |
0 |
|||||
| 80km | 1550 DFB |
-3 |
2 | ||||
| CWDM |
-3 |
2 | |||||
| Extinction Ratio | ER | 1.25G | 9 | - |
dB |
||
| Supply Current | ICCT | - |
150 |
mA |
|||
| Input Differential Impedance | Rin | 100 |
Ω |
||||
| Data Input Swing Differential | Vin |
300 |
1200 |
mV |
|||
| Optical Modulation Amplitude | OMA |
174 |
μW |
||||
| Transmit Disable Voltage | VD |
2.0 |
Vcc |
V |
|||
| Transmit Enable Voltage | VEN | 0 |
0.8 |
V |
|||
| Transmit Disable Assert Time |
10 |
us |
|||||
| Optical Rise/Fall Time | Tr/ Tf (20-80%) | 150 |
260 |
ps |
|||
| Deterministic Jitter Contribution | TX ΔDJ |
51.7 |
ps |
||||
| Total Jitter Contribution | TX ΔTJ |
90 |
ps |
||||
| Output Optical Eye | IUT-T G.957 Compliant | ||||||
Note1: l:1270,1290,1310,1330,1350,1370,1390,1410,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610.nm
2 Receiver （T=25℃, Vcc=3~3.6V (+3.3V) 1.25G
| Parameter | Symbol | Min. | Typ | Max. | Unit | |||
| Wavelength Range | lc | 1100 | 1610 | nm | ||||
| Sensitivity | 0~20km | 1.25G | Pin | PMIN | - | -24 | -23 | dBm |
| 40km | Pin | - | -25 | -24 | ||||
| 80km | Pin | - | -27 | -26 | ||||
| MAX. Input Power (Saturation) | PMAX | -3 | - | - | ||||
| Signal Detect Assert | PA | - | - | -24 | ||||
| Signal Detect De-assert | PD | -34 | - | - | ||||
| Signal Detect Hysteresis | PHYS | 1 | - | 4 | ||||
| Supply Current | ICCR | - | - | 150 | mA | |||
| Data Output Swing Differential | Vout | 400 | - | 1000 | mV | |||
| Signal Detect Voltage – High | VSDHC | 2.0 | - | VCC | V | |||
| Signal Detect Voltage – Low | VSDL | 0 | - | 0.8 | ||||
Notes:
switch from a high state to a low state.
1)Value of output power and sensitivity can be customized according to the demand
Ordering Information
Example
DSFP 49 24-C 1 2 LC - 80
| Sign | Mean | Description | |||||
| DSFP |
Module type |
DSFP= Dual fibers SFP | SFP=Single fiber SFP | ||||
| 49 |
Center wave |
30=1310tx/NO rx | 50=1550tx/NO RX | CWDM Like 49=1490 CWDM TX 1100~1610 RX | |||
| 24 | date Rate | 03=155M | 12=622M | 24=1.25G | 48=2.5G | 60=3.125G | |
| C | Laser type | F=FP | D=DFB | C=CWDM | V=VCSEL | ||
| 1 |
Operating T |
1=-20~+70℃ | 2=-40~+85℃ | ||||
| 1 | DDMI | 1=NO DDM | 2=DDMI | ||||
| LC | Connector | SC=SC | LC=LC | ||||
| 80 | Distance | 022=220M | 055=550M | 5=5KM | 10=10KM | ||
| 20=20KM | 40=40KM | 80=80KM | 100=100KM | ||||
Example
DSFP 3X 24-0 12 LC - 80
| Sign | Mean | Description | |||||
| DSFP |
Module type |
DSFP= Dual fibers SFP | SFP=Single fiber SFP | ||||
| 3X |
Center wave |
88=850NM T&R | 3x=1310 tx/1100~1610 RX | CWDM Like 49=1490 CWDM TX 1100~1610 RX | |||
| 24 | date Rate | 03=155M | 12=622M | 24=1.25G |
48=2.5G |
60=3.125G | |
| 0 | Laser type | 0=no LD | |||||
| 1 |
Operating T |
1=-20~+70℃ | 2=-40~+85℃ | ||||
| 2 | DDMI | 1=NO DDM | 2=DDMI | ||||
| LC | Connector | SC=SC | LC=LC | ||||
| 20 | Distance | 022=220M | 055=550M |
5=5KM |
10=10KM | ||
| 20=20KM | 40=40KM |
80=80KM |
100=100KM | ||||
Typical products
| Part No. | Wavelength | Con- nector | Temp. | TXPower (dBm) | RX Sens(Max.) (dBm) | DD MI | Distance |
| DSFP3X24-F11LC-20 | T 1310FP/rx 1100~1610 |
LC |
-20 to 70 | -9 to-0 | -23 | F | 20km |
| DSFP5X24-D12LC-40 | T 1550DFP /R 1100~1610 |
LC |
-20 to 70 | -5~0 | -24 | T | 40KM |
| DSFP6124-C12LC-80 | T 1610 CWDM/ R1100~1610 |
LC |
-20 to 70 | -3 to 2 | -26 | T | 80km |
Designing notice
DSFP Pin description
|
Pin |
Descriptions | Pin | Descriptions |
|
1 |
VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
|
2 |
TFAULT | Transmitter Fault. | 2 |
|
3 |
TDIS | Transmitter Disable. Laser output disabled on high or open. | 3 |
|
4 |
MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 4 |
|
5 |
MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 4 |
|
6 |
MOD_DEF(0) | Module Definition 0. Grounded within the module. | 4 |
|
7 |
Rate Select | No connection required | |
|
8 |
LOS | Loss of Signal indication. Logic 0 indicates normal operation. | 5 |
|
9 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
10 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
11 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
12 |
RD- | Receiver Inverted DATA out. AC Coupled | |
|
13 |
RD+ | Receiver Non-inverted DATA out. AC Coupled | |
|
14 |
VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
|
15 |
VCCR | Receiver Power Supply | |
|
16 |
VCCT | Transmitter Power Supply | |
|
17 |
VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
|
18 |
TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
|
19 |
TD- | Transmitter Inverted DATA in. AC Coupled. | |
|
20 |
VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)
SFP Host Board Mechanical Layout
Product detail pictures:
Related Product Guide:
Microsemi PolarFire FPGA burst mode receiver enables transceiver-sized 10G PON OLT designs | Single Fiber Sfp Module
U.N. General Assembly Updates: Trump Speaks Out on Globalization | Module Sfp
With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Wholesale Price China 10gb Transceiver Sfp Lr - 1.25G 20KM 1310nm Dual Fiber Single mode SFP module – HDV , The product will supply to all over the world, such as: Eindhoven, Jamaica, Australia, Our factory covers an area of 12,000 square meters, and has a staff of 200 people, among which there are 5 technical executives. We are specialized in producing.We have rich experience in export. Welcome to contact us and your enquiry will be replied as soon as possible.
By Renee from venezuela - 2015.06.18 19:26
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Daisy from Cancun - 2015.09.08 17:09
Products categories
Write your message here and send it to us